Onkyo TX-NR696

7.2Ch Network AV Receiver

Future-ready home entertainment with THX® Certified Select™

A harmonious mix of tech and tradition, the TX-NR696 adapts to entertainment life and finds the emotion in every sound source, from 3D film-scores to vinyl records. Next-Generation Network Audio gathers Chromecast built-in*1, Works with Sonos, AirPlay 2, and DTS Play-Fi® with streaming services for smooth multi-room audio evolved by support for the new high-speed 802.11ac (2x2 MIMO) Wi-Fi® specification*2. Dolby Atmos® and DTS:X® pull audiences deep into movies and games, THX Certified Select assuring a theater-reference experience. If a 5.2.2-ch setup isn’t possible, Dolby Atmos Height Virtualizer*3 and DTS Virtual:X™*3 can create a 3D sound-field from horizontal speaker layouts. Zone 2 outputs bring amped multi-source audio to two rooms, while a flexible new zone line-out/front L/R pre-out terminal lets you listen how you want, where you want. With revitalized DAA system, 4K/60p/HDR HDMI® terminals, and many extras, this product excels in every aspect.

*1 The unit may automatically download and apply an Over-the-Air software update during setup.
*2 Some countries or regions have regulations that affect wireless signal strength and the use of Wi-Fi channels.
*3 Enabled with a future firmware update.

Jamo S 807 HCS 5.0.2 Atmos Speaker Package

Modern design meets high performance. S 807 Dolby Atmos ready home cinema system delivers incredible acoustic performance with an elegant design.

Complete 5.0.2 Home Theater
2 x S 807 Tower Speakers
2 x S 801 Speakers for Surround Sound
1 x S 81 CEN Center Channel Speaker
2 x S 8 ATM Dolby Atmos Speakers

Jamo S807 Floorstanding Speaker

Unlike any tower speaker, the S 807 is Dolby Atmos® ready and able to deliver incredible acoustics with a patent-pending connection points atop the cabinet for seamless integration of the S 8 ATM topper to deliver the overhead effect of Dolby Atmos.

• Dolby Atmos ready
• Patent-pending seamless fastening system
• Elegant, contemporary design
• Black, Walnut and White finishes
• WaveGuide acoustic technology
• 25mm (1") soft dome tweeter
• Dual 102mm (5”) Polyfiber Woofers

Jamo S801 Bookshelf Speaker

The S 801 bookshelf speaker features a 1” soft dome tweeter for smooth, refined high frequencies, with a 4” polyfiber woofer for balanced, musical low end. The integrated WaveGuide focuses the high frequency sound for dynamic, true-to-life reproduction, while the rear-firing port allows for better low frequency extension.

• Elegant, contemporary design
• Compact cabinet for flexible placement
• WaveGuide acoustic technology
• Seamless magnetic grille
• 25MM (1") soft dome tweeter
• 102mm (4") polyfiber woofer

Jamo S81 Centre Speaker

The S 81 CEN is engineered for clear, balanced dialogue reproduction, making it an ideal center channel for a premium surround sound system. The WaveGuide focuses frequencies in the vocal range directly to the listening area so dialogue is clear, articulate, and realistic, and you never miss a detail.

• Optimum dialogue reproduction
• Elegant, contemporary design
• WaveGuide acoustic technology
• Seamless magnetic grille
• 1" soft dome tweeter
• Dual 4" polyfiber woofers

S 8 ATM Dolby Atmos Speakers

Recreate the incredible cinematic experience of Dolby Atmos with the S 8 ATM Dolby Atmos Certified Elevation speaker, which reflects Dolby Atmos height effects off the ceiling down to the listener, to create a truly stunning, 3-dimensional surround sound experience.

• True Dolby Atmos sound
• Patent-pending seamless fastening system
• Elegant, contemporary design
• Black, Walnut and White finishes
• 102mm (4”) Polyfiber Woofer

SPECIFICATION:

Onkyo TX-NR696
Amplifier Section
Power output (All channels)
175 W/Ch
(6 Ω, 1 kHz, 10% THD, 1-ch driven)
165 W/Ch
(6 Ω, 1 kHz, 1% THD, 1-ch driven, IEC)
Dynamic power 240 W (3 Ω, Front)
210 W (4 Ω, Front)
120 W (8 Ω, Front)
THD+N (Total Harmonic Distortion + Noise)
0.08% (20 Hz–20 kHz, half power)
Input sensitivity and impedance
200 mV rms/47 kΩ (Line)
3.5 mV rms/47 kΩ (Phono MM)
Rated RCA output level and impedance
1 V rms/470 Ω (Subwoofer pre-out)
200 mV rms/2.3 kΩ (Zone B/Zone 2 line-out)
Frequency response 10 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
Tone control ±10 dB, 20 Hz (Bass)
±10 dB, 20 kHz (Treble)
Signal-to-noise ratio 106 dB (Line, IHF-A)
80 dB (Phono, IHF-A)
Speaker impedance 4 Ω–16 Ω
Tuner Section
Tuning frequency range
FM 87.5 MHz–108 MHz
87.5 MHz–107.9 MHz (Taiwan Model)
AM 522 kHz–1,611 kHz
530 kHz–1,710 kHz
530 kHz–1,710 kHz (Taiwan Model)
General
Power supply AC 220–240 V~, 50/60 Hz
Power consumption 570 W
635 W (Taiwan Model)
No-sound power consumption
65 W
Standby power consumption
0.15 W
Dimensions (W x H x D) 435 x 173.5 x 379.5 mm
Weight 10.0 kg
CARTON
Dimensions (W x H x D) 534 x 265 x 468 mm
Weight 12.5 kg
Supplied Accessories
• Indoor FM antenna • AM loop antenna • Speaker setup microphone
• Quick Start Guide • Remote controller • AAA (R03) batteries x 2

Jamo S807 HCS Technical Specifications
S807
- Freq Response: 42Hz-26kHz (+/-3dB)
- Sensitivity: 90dB (2.83V @ 1m)
- Power Handling: 100W / 200W
- Impedance: 8 Ohm
- HF: 25mm (1”) Soft Dome Tweeter
- LF: 2x 127mm (5”) Polyfiber Woofers
- Crossover Frequency: 2kHz
- Speaker Enclosure: MDF
- Bass Reflex: Front Firing Slot Port
- Input: Single Binding (Main/Height)
- Dimensions (HWD): 915 x 191 x 252mm

S81 CEN
- Freq Response: 71Hz-26kHz (+/-3dB)
- Sensitivity: 86dB (2.83V @ 1m)
- Power Handling: 60W / 240W
- Impedance: 8 Ohm
- HF: 25mm (1”) Soft Dome Tweeter
- LF: 2x 102mm (4”) Polyfiber Woofers
- Crossover Frequency: 2kHz
- Speaker Enclosure: MDF
- Bass Reflex: Rear Firing Slot Port
- Inputs: Single Binding Posts
- Dimensions (HWD): 184 x 435 x 220mm

S801
- Freq Response: 76Hz-26kHz (+/-3dB)
- Sensitivity: 85dB (2.83V @ 1m)
- Power Handling: 60W / 120W
- Impedance: 8 Ohm
- HF: 25mm (1”) Soft Dome Tweeter
- LF: 102mm (4”) Polyfiber Woofer
- Crossover Frequency: 2kHz
- Speaker Enclosure: MDF
- Bass Reflex: Rear Firing Slot Port
- Inputs: Single Binding Posts
- Dimensions (HWD): 285 x 156 x 163mm

S8 ATM
- Frequency Response Conforms to Dolby Atmos® Specification
- Sensitivity Conforms to Dolby Atmos® Specification
- Power Handling 50W / 100W
- Nominal Impedance 8 Ohm
- Driver 102mm (4”) Polyfiber Woofer
- Enclosure MDF
- Enclosure Type Sealed
- Inputs Integrated Conductive Feet (For use with S 809, S 807, or S 803 models only)
- Finish Black
- Dimensions 180mm x 191mm x 242mm 7.10” x 7.52” x 9.53”
- Features: Seamless Integration atop Studio 8 Dolby Atmos Speakers