A2+ Next Gen Home Music System w/ Bluetooth aptX-HD

The A2+ Next Gen Home Music System is perfect for the desktop and can fill your rooms with full and clear sound. Setup is a snap, so you’ll be ready to rock in no time. Connect via USB-C audio from your computer, aptX-HD Bluetooth from your phone, tablet or computer, or kick it old school with an analog connection from that turntable or prized tape deck. The A2+ Next Gen also features an output so you can upgrade your system and boost your bass in a heartbeat by connecting a subwoofer, like the Audioengine S6.

Pro Tip For superior desktop audio, use the A2+ Next Gen's USB-C or Bluetooth input. This bypasses your computer's lower quality audio components, allowing the built-in DAC to provide a clearer, more detailed sound.

An Experience That Will Take You Far Beyond the Desktop

On one end of the spectrum, some speakers sound amazing but cost as much as all the bling in L.A. On the other, some speakers are reasonably priced but aren’t much better constructed than the box they came in. And in the center, there’s Audioengine.

We designed the A2+ Next Gen to exceed your expectations for sound while not exceeding the limits of your budget.

With bass you’d expect from a nightclub and a cabinet that fits both your desktop and your aesthetic, the A2+ Next Gen has found a middle ground that’s miles beyond

Big Sounds Come from Small Speakers

Don’t let their size fool you. These little speakers are packed with much more sound than you would expect. Clear, full, and powerful audio ideal for your computer and smaller rooms. The A2+ Next Gen Computer Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, extended-range wireless aptX-HD Bluetooth, and built-in power amps wrapped in precision-tuned, hand-crafted cabinets. In other words, we put a lot of thought into these speakers.

The sound will fill almost any room. The speaker itself won’t.

Reasons to love it

Here are just a few of the benefits to owning the A2+ Next Gen System

• Designed for desktops and smaller spaces
• Analog inputs
• Plug-and-play USB computer audio input
• Extended-range wireless aptX-HD Bluetooth
• Inputs are always ready to go
• 2 speakers for a true stereo experience
• No network setup, no passwords, no meltdowns

Wireless That Really Works with Every App and Every Device

Whether you’re rocking a computer, tablet, phone, or turntable, setting up the A2+ Next Gen Computer Speakers is easy. Plus, there are no network settings, passwords to enter, or other setup hassles. You’ll be listening to your favorite tunes in no time.

Fast, Frustration-Free Set Up

Whether you’re rocking a computer, tablet, phone, or turntable, setting up the A2+ Next Gen Computer Speakers is easy. Plus, there’s no network setup, passwords to enter, or buttons to push. All you have to worry about is deciding what you want to hear first.

Type
Powered Bluetooth aptX-HD speaker system

Amplifier Type
Class AB

Rated Power Output:
15W RMS per channel at 4 ohms (measured in compliance with 16 C.F.R. § 432.3)
Peak Power Output: 30W per channel at 4 ohms (AES)
Total Peak Power Output: 60W (AES)

Drivers
2.75” aramid fiber woofers

0.75“ Silk dome tweeters

Inputs
3.5 mm stereo mini-jack, RCA L/R, USB, Bluetooth

Outputs
RCA variable line-out

Input Voltages
100-240 V 50/60 Hz auto-switching

SNR
>95 dB (typical A-weighted)

THD+N
Less than 0.05% at all power settings

Crosstalk
<50 dB

Frequency Response
65 Hz-22 kHz ±2.0 dB

Frequency Response w/ Bass Reduction Switch selected
N/A

Analog Input Impedance
N/A

Nominal Impedance
N/A

Input Impedance
10K ohms unbalanced

Crossover Frequency
N/A

Protection
Output current limiting, thermal over-temperature, power on/off transient protection

Power Consumption
Idle: 5W

Standby Consumption
N/A

Phase
N/A

Recommended Amplifier Power
N/A

Battery Life
N/A

Battery Charge Time
N/A

Internal BT Receiver
Qualcomm QCC 3031/3034/3040

Input Bit Depth
16 bit (SBC, AAC), 24 bit (aptX-HD, aptX)

Bluetooth Receiver Type
Bluetooth 5.3

Supported Codecs
aptX-HD, aptX, AAC, SBC

Supported Bluetooth Profiles
A2DP

Wireless Operation Range
Up to 100 ft (30 m) typical

Input Data Rate
Determined by Bluetooth

Wireless Latency
~120 milliseconds (ms)

Connector Type
USB TYPE-C

USB Device Class
type 1.1 and above

Input Bit Depth
24 bit (padded)

Input Sample Rate
48 kHz

Internal D/A Converter

Dimensions (HWD)
Each speaker - 6" (15.6 cm) x 4" (10.6 cm) x 5.25" (13.8 cm)

Weight
Left (active) - 3.6 lb (1.72 kg)
Right (passive) - 3.2 lb (1.51 kg)

Total Shipping Weight
10 lb (4.51 kg)

Shipping Box Dimensions (LWH)
15” (38.1 cm) x 7” (17.8 cm) x 10.5” (26.7 cm)